Certificate related problems when using a web proxy server
I have several times encountered these issues, so it decided it was time to write a blog post about it.
You are using a proxy server for web communication. Direct communication to the Internet is blocked. The proxy is configured in Internet Explorer Options, as shown in these screenshots:
If you do not configure this, you cannot reach the Internet. If you do configure this, you can reach the internet. Just as expected.
Even if the proxy is configured correctly, as seen above, some Internet communication is still blocked.
One common problem area is certificate validation, specifically downloading CRLs from the Internet. I have seen problems when starting CA servers (after Root CA CRL renewal) and/or when or accessing NDES web pages. See examples at the end of this post for details. If you solve something else, let me know so I can add it to help others.
There are actually two different proxy settings in Windows, WinINet and WinHTTP.
WinINet This is what we configure in the screenshots above. Most applications use this setting.
WinHTTP This is a separate proxy setting. Most Windows services use this setting, including the one responsible for certificate revocation checking. This proxy setting has no GUI but can be configured using the command netsh.
You can read more about the differences between WinINet and WinHTTP here. Especially note Services Support (Can be run from a service or a service account [Yes/No]).
The solution is to configure WinHTTP with the same proxy settings as WinINet.
This command shows the current WinHTTP proxy configuration:
netsh winhttp show proxy
As you can see, no proxy server is configured for WinHTTP.
You can manually add the proxy configuration (and optional Bypass List) by entering the relevant proxy information:
set proxy tomdemoproxy.se:8080 bypass-list=*.tomdemo.se
But there is an easier way. You can simply copy and apply the current WinINet proxy configuration to WinHTTP:
netsh winhttp import proxy source=ie
Note that this requires an elevated prompt, otherwise you will get the error message Error writing proxy settings. (5) Access is denied.
This has solved many communication issues I have had where a web proxy server is used.
If you wish to reset the WinHTTP proxy setting back to the no proxy setting you can use the following command:
netsh winhttp reset proxy
Example errors that were solved
Starting Active Directory Certificate Services
When trying to start the CA server you get this error message:
The event log shows Event Id 100 from source CertificationAuthority:
Active Directory Certificate Services did not start: Could not load or verify the current CA certificate <CA name>. The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE).
Also, Event Id 48 from source CertificationAuthority:
Revocation status for a certificate in the chain for CA certificate 0 for <CA Name> could not be verified because a server is currently unavailable. The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE).
Note: A dirty trick to quickly get the CA up and running is to disable CRL checking on the CA server:
certutil –setreg ca\CRLFlags +CRLF_REVCHECK_IGNORE_OFFLINE
This is of course not recommended and must be turned back on as soon as the CRL is available again, but might be justified in some rare cases.
Accessing NDES / SCEP web pages
Visiting https://FQDN works great (shows IIS standard home page).
But when trying to access the URL https://FQDN/certsrv/mscep/mscep.dll you get this error message:
The same message appears when going to the URL http://<FQDN>/certsrv/mscep_admin
The Application event log on the NDES server shows the following error:
These two error events occur every time I revisit the URLs.
Have you solve an issue
If you run into any issues solved by this, please let me know so I can add them here to help others.Läs hela artikeln